Explorer 2WD V6-245 4.0L VIN X SFI (1999)
1. Assemble the front band servo cover, front band servo piston, and the servo piston spring.
1
Install the front band servo piston into the front band servo cover.
2
Install the servo piston spring on the front band servo piston.
2. CAUTION: Do not damage O-ring during installation. Do not press servo cover and O-ring past relief hole in case, or O-ring damage
may occur.
Install the front band servo assembly into the transmission case.
-
Lubricate the front band servo cover O-ring with petroleum jelly.
3. Use Servo Cover Compressor to install the front band servo cover retaining ring.
1
Install the Servo Cover Compressor and compress the front band servo cover.
2
Install the front servo cover retaining ring.
4. Install the main control valve body.
5. Adjust the front band.
6. Position the transmission servo heat shield on the transmission and install the nut.