Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Park Gear: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the transmission fluid pan.
1
Remove the transmission fluid pan.
2
Remove and discard the transmission fluid pan gasket.
4. Remove the transmission fluid filter.
1
Remove the transmission fluid filter screw.
2
Remove the transmission fluid filter.
5. Remove wire loom guide and protector.
-
Carefully lift up on wire loom guide and protector and disengage the retaining pins from the solenoid clamps.