Explorer 2WD V6-245 4.0L VIN X SFI (1999)
3. Remove the rear driveshaft.
1
Remove the rear driveshaft bolts.
2
Remove the rear driveshaft.
4. CAUTION: Use the extension housing bushing remover carefully so that the seal area is not damaged.
Use Seal Remover and Impact Slide Hammer, and remove the extension housing seal.
5. Remove extension housing bushing.
1
Install Housing Bushing Remover.
2
Remove extension housing bushing.
Installation
1. CAUTION: The lube hole in the extension housing bushing must be aligned with the lube groove in the extension housing. This groove is