Explorer 2WD V6-245 4.0L VIN X SFI (1999)
1. Install the clutch release hub and bearing.
-
Lubricate the clutch release hub and bearing at sliding points with Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford
specification ESA-M1C75-B.
1
Position the (A) spring and the (B) clutch release hub and bearing onto the clutch slave cylinder.
2
Push the clutch release hub and bearing against the spring and install the retainer ring.
2. Install the clutch slave cylinder.
1
Position the clutch slave cylinder.
2
Install the bolts.
3. Install the transmission.
