Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Pinion Flange: Service and Repair
Limited Slip
Special Tools
Removal
1. CAUTION: Do not allow the calipers to hang from the brake hoses.
NOTE: Remove the rear wheels and the rear disc brake calipers to prevent brake drag during the drive pinion bearing preload adjustment.
Remove the rear disc brake calipers.
2. Index-mark the driveshaft flange and pinion flange to maintain initial balance during installation.
3. Remove the four bolts and disconnect the driveshaft. Position the driveshaft aside.
