Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Flywheel: Service and Repair
Removal and Installation
Special Tools
Removal
1. Remove the clutch disc and pressure plate.
2. CAUTION: Two bolts should be loosened but left in to prevent the flywheel from falling.
Remove six of eight bolts. Loosen the two remaining bolts but leave in place.
3. Press the flywheel off the crankshaft.
-
Install the two bolts in the threaded holes in the flywheel and remove flywheel.
4. Remove the bolts remaining in the crankshaft.
5. Remove the flywheel.
Installation
