Explorer 2WD V6-245 4.0L VIN X SFI (1999)
1
Remove the bolts.
2
Remove the rear driveshaft.
8. Use the (A) Hi-Lift Jack to support the (B) transmission.
-
Secure the (B) transmission with the (C) strap.
9. Remove the nuts.
10. Remove the crossmember.
1
Remove the six bolts (three each side).
2
Remove the crossmember.
11. Remove the (RH) transmission mount bolt.
1
Remove the bolt.
2
Reposition the exhaust mounting bracket.
12. Lower the transmission to access extension housing bolts.