Explorer 2WD V6-4.0L (2009)
Grille: Service and Repair
Radiator Grille Opening Panel
Radiator Grille Opening Panel
Removal and Installation
1. Remove the headlamp assemblies.
2. Remove the front bumper cover.
3. Remove the 5 grille panel deflector pin-type retainers.
4. Remove the grille panel deflector.
5. Remove the 8 grille opening panel bolts.
-
To install, tighten to 9 Nm (80 lb-in).
6. Remove the grille opening panel center bolt.
-
To install, tighten to 9 Nm (80 lb-in).
7. Remove the grille opening panel.
8. To install, reverse the removal procedure.