Explorer 2WD V6-4.0L (2009)
Cabin Temperature Sensor / Switch: Service and Repair
Ambient Air Temperature Sensor
Ambient Air Temperature Sensor
Removal and Installation
Mountaineer
1. Remove the radiator grille.
2. Remove the pin-type retainers and position the air deflector forward.
3. Remove the 2 air deflector pin-type retainers and detach the air deflector from the 2 locator pins on the radiator support.
All vehicles
4. Detach the ambient air temperature sensor electrical connector.
5. Remove the ambient air temperature sensor.
6. To install, reverse the removal procedure.
