Explorer 2WD V6-4.0L (2009)
Maintenance Required Lamp/Indicator: Service and Repair
Oil Life Reset and Start Value - Without Message Center
Message Center Configuration
Oil Life Reset And Start Value - Without Message Center
NOTE: Oil life calculation is set at a maximum of approximately 12,000 km (7,500 miles) or 180 days.
NOTE: All message center functions are carried out using the single stem reset button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET IF NEW
OIL.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO 100%.
3. Once OIL LIFE SET TO 100% is displayed, press and hold the SELECT/RESET button for more than 2 seconds until the message center displays
OIL LIFE SET TO XXX%.
4. Press and release the SELECT/RESET button to reduce the start value (10% for each button press).
5. Press and release the SELECT/RESET button to exit the procedure.