Explorer 2WD V6-4.0L (2009)
13. NOTE: Follow the same routing for the electrical connector that was used during removal.
If equipped, connect the heated windshield electrical connectors.
14. Install the cowl panel grille.
15. Raise the front portion of the headliner.
16. Install the interior mirror.
17. Install the sun visors, retainers and, if equipped, the overhead console.
18. If equipped, install the roof opening panel trim.
19. Install the RH and LH side A-pillar trim panels.
20. Clean the exterior and interior of the windshield glass with glass cleaner.