Explorer 2WD V6-4.0L VIN E (2001)
7. Remove the door latch.
1
Remove the screws.
2
Disconnect the door latch from the power door lock actuator.
3
Remove the door latch.
8. Disconnect the door latch push button rod from the door latch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
Front door shown, rear door similar.
-
Connect the remote control rod, door latch push button rod and lock cylinder rod to the front door latch before installing the new latch.
-
When the battery is disconnected or reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
