Explorer 2WD V6-4.0L VIN K (2007)
Keyless Entry Transmitter: Removal and Replacement
TAILGATE LATCH REMOTE CONTROL
Removal and Installation
1. Open and support the tailgate.
2. Remove the 7 bolts, the 4 pin-type retainers and the tailgate access panel.
-
To install, tighten to 5 Nm (44 lb-in).
3. Open the 2 clips and release the 2 tailgate latch actuating rods from the tailgate remote control.
4. Release the 2 tailgate latch actuating rod locators from the tailgate.
5. Remove the 2 nuts and the tailgate remote control.
-
To install, tighten to 9 Nm (80 lb-in).
6. To install, reverse the removal procedure.