Explorer 2WD V6-4.0L VIN K (2007)
15. Remove the 4 recliner-to-cushion frame bolts and remove the backrest assembly.
-
Route out the manual lumbar cable and any wire harnesses (if equipped).
-
To install, tighten to 55 Nm (41 lb-ft).
16. To install, reverse the removal procedure.
17. Install the front seat and repower the SRS. If a passenger seat has been serviced, do not prove out the SRS at this time.
Passenger seat
18. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS.
Seat Backrest - Second Row, 40 Percent E-Z Entry
SEAT BACKREST - SECOND ROW, 40 PERCENT E-Z ENTRY
