Explorer 2WD V6-4.0L VIN K (2007)
Camshaft: Service and Repair
Camshaft Bearing Journal Clearance
Camshaft Bearing Journal Clearance
NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance.
1. Remove the camshaft bearing cap and lay Plastigage across the surface.
2. NOTE: Do not turn the camshaft while carrying out this procedure.
Position the camshaft bearing cap and install the bolts.
3. Use Plastigage to verify the camshaft journal clearance.
^
If out of specification, install new components as necessary.
Camshaft Surface Inspection
Camshaft Surface Inspection
1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
^
If excessive pitting or damage is present, install new components as necessary.
Camshafts
Camshafts
