Explorer 2WD V6-4.0L VIN K (2007)
19. Connect the lower radiator hose.
20. NOTE: The 5 bolts may or may not have washers. All the bolts should be of the same type.
Install the 5 cylinder block cradle-to-front cover bolts.
^
Tighten bolts with washers to 10 Nm (89 inch lbs.).
^
Tighten bolts without washers to 14 Nm (10 ft. lbs.).
21. Position the wiring harness bracket and install the nut.
^
Tighten to 20 Nm (15 ft. lbs.).
22. Install the crankshaft front seal.
23. Connect the battery ground cable. For additional information, refer to Battery.
24. Fill the engine cooling system For additional information, refer to Cooling system.
