Explorer 2WD V6-4.0L VIN K (2007)
Removal
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of
the power steering components can result.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the power steering pump pulley.
3. Remove the steering line clamp plate nut.
4. Rotate the steering line clamp plate and disconnect the fluid cooler return line from the steering gear.
^
Discard the O-ring seal.
5. Disconnect the pressure line from the steering gear.
^
Discard the O-ring seal.
6. Remove the pressure line bracket-to-engine nut (4.6L) or bolt (4.0L).
