Explorer 2WD V6-4.0L VIN K (2007)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k/Page-2232004.png)
1. Align the holes of the side air bag module bracket to the U-nuts on the backrest frame.
-
Install new U-nuts if installing a new side air bag module.
2. Slide the side air bag module onto the backrest frame so the bracket hook wraps around the backrest frame.
3. Install the side air bag module and the bolts.
-
Tighten to 10 Nm (89 lb-in).
4. Position back the seat backrest foam pad.
5. Attach the side air bag wiring harness retainers to the seat backrest frame.
6. Attach the hook-and-loop strips, and roll the seat back trim cover down and install the first row of hog rings.
7. Attach the hook-and-loop strips, and roll the seat back trim cover down and attach the seat back lower inner trim cover J-clip.