Explorer 2WD V6-4.0L VIN K (2007)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of
the power steering components can result.
1. Using a suitable suction device, drain the power steering fluid reservoir.
2. Remove the power steering fluid reservoir bolt.
^
To install, tighten to 9 Nm (80 inch lbs.)
3. Release the reservoir-to-pump hose clamp and disconnect the hose.
4. Release the power steering fluid cooler-to-reservoir hose clamp and disconnect the hose.
5. Remove the power steering fluid reservoir.
6. To install, reverse the removal procedure.
^
Fill the power steering system.