Explorer 2WD V6-4.0L VIN K (2007)
when removed.
1. Remove the toe link.
2. Remove the parking brake cable bracket bolt.
^
To install, tighten to 10 Nm (89 inch lbs.)
3. Remove and discard the trailing arm bolt.
^
To install, tighten to 300 Nm (222 ft. lbs.) at curb height.
4. Remove the 3 wheel knuckle bolts and the trailing arm.
^
Discard the bolts.
^
To install, tighten to 275 Nm (203 ft. lbs.)
5. To install, reverse the removal procedure.