Explorer 2WD V6-4.0L VIN K (2007)
Installation
1. Install the transmission cooler tubes into the vehicle.
2. Install the transmission fluid cooler tube bracket onto the stud.
3. Verify the case fitting torque.
^
Tighten to 56 Nm (41 ft. lbs.)
4. CAUTION: To prevent cross threading, all tube nuts must be hand started before being torqued to specification.
Using a backup wrench to hold the case fittings securely, install the transmission fluid cooler tubes.
^
Tighten to 40 Nm (30 ft. lbs.)
