Explorer 2WD V6-4.0L VIN K (2007)
4. CAUTION: Be sure to use the same brand and cure-rate products for the adhesive and primer. Do not mix different brands of urethane
and primer. Refer to the Material Chart in this procedure.
NOTE: Sika uses the same black primer for the glass and pinch weld area.
If installing a new rear quarter window glass, apply urethane glass primer according to manufacturer's instructions. Allow at least 6 minutes to
dry.
5. Cut the urethane adhesive applicator tip to specification.
6. NOTE: Use either a high-ratio, electric or battery-operated caulk gun that will apply the urethane with less effort and continuous bead.
Use caution when applying urethane adhesive. Apply to the outside edges of the locating tabs on the glass surface. Start at the bottom and work
around to the sides of the rear quarter window glass.
7. Install the rear quarter window glass, aligning it to the marks previously made.
8. Install the wiring harness brackets.
9. Install the rear quarter trim panel.
