Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Keyless Entry Key-Pad: Service and Repair
Keyless Entry Keypad Code Programming
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will
erase the stored customer code. The existing code will not need to be erased to program new a code.
3. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is
programmed.
