Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Body / Frame Mount Bushing: Service and Repair
Body Support - Number 2
BODY SUPPORT - NUMBER 2
Materials
Material
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and Lower Insulator
1. Position the front seat forward.
2. Remove the door scuff plates.
3. Position back the carpeting and remove the body insulator plug.
4. NOTE: This step may require holding the lower retainer with an appropriate tool.
Remove the body mount insulator bolt.
5. NOTE: If the lower body mount will not remove, loosely install the body mount bolt and tap on the body mount bolt head with a hammer.