Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
5. Inspect the disc brake caliper for leaks.
^
If leaks are found, disassembly is required.
Installation
1. Install the disc brake caliper.
1. Install the disc brake caliper.
2. Install the disc brake caliper bolts.
2. Install the front brake hose.
^
Use new copper washers; connect the front brake hose.
^
Install the front brake hose bolt.
3. Bleed the disc brake caliper.
4. Install the wheel and tire assembly.
5. Check the brake system for correct operation.
Caliper Disassembly and Assembly
Brake Caliper
Disassembly
WARNING: Use of any brake fluid other than approved DOT 3 will cause permanent damage to brake components and will render the
brakes inoperative.
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water to induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted or plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
