Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
1. NOTE: Use a suitable suction device to remove brake fluid from the master cylinder.
NOTE: Clean the support bracket and slipper surfaces.
Install the slippers and the pads.
1. Install the slippers.
2. Install the pads.
2. NOTE: If installing new pads, the caliper pistons must be compressed using a C-clamp and a wooden block. Lower the brake fluid level in the
master cylinder if required.
Rotate the disc brake caliper into the anchor bracket.
3. Install the caliper bolt.
4. Install the wheel and tire assembly.
5. Check the brake system for correct operation.
