Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
HYDRAULIC CONTROL UNIT (HCU)
Removal and Installation
All vehicles
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.
1. Disconnect the battery ground cable.
Vehicles built before 3/2002
2. Disconnect the electrical connector by lifting up on the release tab.
Vehicles built after 3/2002
3. Disconnect the electrical connector by rotating the protective cover.
4. Disconnect the brake lines from the Hydraulic Control Unit (HCU).
Vehicles built before 3/2002
