Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the nut, bolt and the accelerator control splash shield.
2. Disconnect the speed control cable.
1
Disconnect the speed control cable end from the throttle nail head.
2
Depress the tabs and separate the speed control cable from the intake manifold.
3. Remove the speed control servo from the inner fender.
1
Disconnect the electrical connector.
2
Remove the speed control servo bracket mounting bolts.
4. Depress the locking tab and rotate the speed control cable cap to remove.
