Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Valve Cover: Service and Repair
Valve Cover LH
Removal and Installation
CAUTION: If the supply manifold is used as a leverage device, damage may occur to the supply manifold. Care must be taken when working around
the fuel supply manifold.
1. Remove the intake manifold.
2. Disconnect the following:
-
Camshaft Position (CMP) sensor electrical connector.
-
Ignition coil electrical connector.
-
Pin-type retainer.
3. Disconnect the fuel injector electrical connectors and the harness standoff clips.
4. Disconnect the accelerator cable routing clip.
5. Disconnect the spark plug wire standoff clips and position aside.
