Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal
Special Tool(s)
Removal
1. Remove the flywheel.
2. CAUTION: Avoid scratching or damaging the oil crankshaft seal running surface during removal of the crankshaft rear oil seal.
Using the special tool, remove the crankshaft rear oil seal.
Installation
1. NOTE: Be sure the crankshaft rear sealing surface is clean and free of any rust or corrosion. To clean the crankshaft rear sealing surface, use
extra-fine emery cloth or extra-fine 0000 steel wool with metal surface cleaner.
Lubricate the crankshaft rear oil seal with clean engine oil and install on the special tool.