Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Timing Cover: Service and Repair
NOTE: Ford does not provide timing marks or additional information for servicing of the timing chains/sprockets without the special tools listed in
this procedure.
Engine Front Cover
Removal
1. Disconnect the battery ground cable.
2. Remove the radiator.
3. Remove the power steering cooler bolts (if so equipped) and position the cooler aside.
4. Remove the crankshaft pulley.
5. Remove the brackets.
6. CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wires.
NOTE: Spark plug wires must be connected to the correct ignition coil terminal. Mark spark plug wire locations before removing them.
Remove all spark plug wires from the ignition coil.