Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag electrical connector.
23. Connect the passenger air bag module electrical connector.
All vehicles
24. Close the glove Compartment.
Vehicles built 03/2002 onward
After installation, The air bag indicator will light continuously for approximately six seconds.
25. Remove the restraint system diagnostic tools from the clockspring electrical connector at the top of the steering column.
26. Position the driver air bag module to the steering wheel.
1. Connect the horn switch electrical connector.
Connect the driver air bag module electrical connectors as noted during removal.
2. CAUTION The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module. Match the
electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air bag module.
