Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Headlamp Bulb: Service and Repair
HEADLAMP BULB
Removal and Installation
WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped.
Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may cause
personal injury.
NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended
period of time may affect headlamp performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn the
headlamps on with the bulb removed.
1. Remove the headlamp assembly.
2. Remove the headlamp bulb.
-
Rotate the bulb sockets one-eighth of a turn and remove.
3. To install, reverse the removal procedure.
