Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
7. Remove the bolt and remove the bracket.
8. Remove the bolt and remove the bracket.
9. Remove the bolt and remove the bracket.
10. Remove the nut and remove the bracket.
11. Remove the auxiliary heater line(s).
NOTE: The vehicle may have to be lowered to provide clearance from lift arms.
INSTALLATION
1. To install, reverse the removal procedure.
-
If new auxiliary heater lines are to be installed transfer the heater hoses to the new lines.
-
Clean and lubricate the coolant hoses with coolant hose lubricant or plain water only if needed