Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
6. Disconnect the fuel pulse damper vacuum hose.
7. Remove the fuel injection supply manifold.
8. If necessary, remove the bolts and the fuel supply tube.
^
Discard the O-rings.
9. Remove and discard the fuel injector-to-supply manifold O-rings.
INSTALLATION
1. To install, reverse the removal procedure.
^
Install new O-ring seals and lubricate them with clean engine oil.
CAUTION: O-ring seals are made of special fuel resistant material. Use of ordinary O-ring seals can cause the fuel system to leak. Do not reuse
the O-ring seals.
