Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Intake Air Duct: Service and Repair
REMOVAL
1. Remove the accelerator control splash shield.
2. Remove the air cleaner outlet tube.
1
Loosen the air cleaner outlet pipe clamp.
2
Disconnect the speed control cable from the cable retainer.
3
Disconnect the crankcase ventilation hose.
4
Loosen the air cleaner outlet pipe clamps and remove.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure the screw clamps do not interfere with the throttle body cam.