Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION SWITCH LOCK CYLINDER - FUNCTIONAL
Removal and Installation
1. Disconnect the battery ground cable and wait at least one minute.
2. Remove the screws and the instrument panel steering column cover.
3. CAUTION: Do not use a prying device to detach the shift lever boot or damage to the shrouds may result.
Detach the boot from the shrouds.
4. Remove the screws and the steering column shrouds.
5. Disconnect the electrical connector.