Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Hard or No Start After Short Hot Soak
TSB 05-13-13
07/11/05
HARD START/NO START CONDITION DURING COLD
AMBIENT TEMPERATURES AFTER SHORT HOT
SOAK PERIOD - 4.0L ENGINE
FORD:
2002-2003 Explorer
MERCURY:
2002-2003 Mountaineer
ISSUE
Some 2002-2003 Explorer/Mountaineer vehicles equipped with the 4.0L engine, may exhibit a hard start/no start condition during cold ambient
temperatures after a short hot soak period.
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration level using WDS release B37.12 and higher or B38.2 and higher. This new
calibration is not included in the B38 CD. Calibration files may also be obtained at the website. If the concern is not resolved, perform normal
diagnostics.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
051313A
2002-2003
0.4 Hr.
Explorer/Mountaineer 4.0L
SOHC: Check For
Diagnostic Trouble Codes
And Reprogram The
Powertrain Control Module
(Do Not Use With 12650D,
1 2650D84)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
04
Disclaimer
