ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Output Shaft Speed (OSS) Sensor|Page 5859 > < Output Shaft Speed (OSS) Sensor|Page 5857
Page 2
background image

6. Disconnect Intermediate Shaft Speed (ISS) sensor electrical connector.

7. Remove ISS sensor.

1

Remove the ISS sensor screw.

2

Remove the ISS sensor from the transmission. 

^

Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.

Installation 

All vehicles 

1. Inspect and lubricate O-ring with petroleum jelly. 

1

Install the ISS sensor into the transmission.

2

Tighten ISS sensor screw.

2. Connect ISS sensor electrical connector.

Output Shaft Speed (OSS) Sensor|Page 5859 > < Output Shaft Speed (OSS) Sensor|Page 5857