Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
13. Connect the passenger air bag module electrical connector.
14. Close the glove compartment.
15. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
16. Position the driver air bag module to the steering wheel.
1
Connect the driver air bag module electrical connector.
2
Slide and engage the driver air bag module electrical connector locking clip.
3
Connect the horn switch electrical connector.
4
Position the driver air bag module to the steering wheel.
17. Install the two driver air bag module bolts (one shown).
