Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
11. Separate the multi-function switch from the clockspring.
1. Release the pin-type retainer and disconnect the electrical connector.
2. Remove the screw.
3. Release the retaining tab.
4. While releasing the retaining tab, slide the multi-function switch up and out of the way.
12. NOTE: Vehicles with an advanced restraint system shown, all others are similar.
Separate the clockspring from the steering column.
1. Remove the bolts.
2. Slide the clockspring off the steering column shaft.
13. NOTE:
-
Vehicles with an advanced restraint system shown, all others are similar.
-
Vehicles built prior to 03/2002 will have two connectors.
Disconnect and remove the clockspring.
14. Inspect the clockspring bracket for damage and remove as necessary.
Installation
