Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
2. Lower the rear LH door opening weatherstrip.
3. Remove the LH side C-pillar trim panel clips.
4. Position the LH side C-pillar trim panel out of the way.
^
Pull the lower portion of the trim panel outward to release the lower tab.
^
Pull the trim panel downward to release the upper tabs. Slide the trim panel down the safety belt, out of the way.
5. Disconnect and remove the side air curtain module bridge resistor.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Disconnect the battery ground cable and wait at least one minute.
