Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
4. Disconnect the large restraints control module (RCM) electrical connector.
1. Pinch the thumb tab and pivot the connector position assurance lever all the way back until it stops.
2. Pull out and disconnect the RCM electrical connector.
5. Disconnect the small RCM electrical connector.
1. Push down to release the retaining tab.
2. While releasing the retaining tab, pull out and disconnect the small RCM electrical connector.
6. Remove the RCM.
1. Remove the nuts.
2. Remove the RCM.
Installation
Vehicles built up to 03/2002
