Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
3. Remove the bolts. Position the remote keyless entry module to the side.
All vehicles
4. Remove the side impact sensor.
1. Remove the bolts.
2. Disconnect the electrical connector.
3. Remove the side impact sensor.
Installation
All vehicles
1. WARNING: The tightening torque of the air bag side impact sensor retaining bolts critical for correct system operation.
Install the side impact sensor.
1. Align the locator tab to the opening in the C-pillar. Position the side impact sensor to the C-pillar.
2. Install the bolts.
3. Connect the electrical connector.
Vehicles with remote keyless entry (passenger side)