Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Front Steering Knuckle: Service and Repair
Wheel Knuckle
Special Tool(s)
Removal and Installation
1. Remove the wheel hub.
2. Remove and discard the cotter pin and nut.
3. CAUTION: Do not use a hammer to separate the tie-rod from the wheel knuckle or damage to the wheel knuckle will result.
CAUTION: Do not damage the tie-rod boot while installing the special tool.
Using the special tool, separate the tie-rod from the wheel knuckle.