ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 9244 > < Air Bag Disarming and Arming|Page 9242
Page 39
background image

18. Disconnect the LH side air curtain electrical connector.

19. Attach the restraint system diagnostic tool to the vehicle harness side of the LH side air curtain electrical connector.

All vehicles

20. Connect the battery ground cable.
21. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).  See: Prove Out

Procedure

22. Disconnect the battery ground cable and wait at least one minute.

REACTIVATION

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS, AND
NOTES AT THE BEGINNING OF THE DEACTIVATION PROCEDURE.

All vehicles

1. Disconnect the battery ground cable and wait at least one minute.

WARNING:  TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BACKUP POWER SUPPLY
MUST BE DEPLETED BEFORE REPAIRING OR REPLACING ANY FRONT OR SIDE AIR BAG SUPPLEMENTAL RESTRAINT
SYSTEM (SRS) COMPONENTS AND BEFORE SERVICING, REPLACING, ADJUSTING OR STRIKING COMPONENTS NEAR
THE FRONT OR SIDE AIR BAG SENSORS, SUCH AS DOORS, INSTRUMENT PANEL, CONSOLE, DOOR LATCHES, STRIKERS,
SEATS AND HOOD LATCHES.

PLEASE REFER TO THE APPROPRIATE COMPONENT OR SYSTEM TO DETERMINE LOCATION OF THE FRONT AIR BAG
SENSORS.

THE SIDE IMPACT SENSORS (IF EQUIPPED) ARE LOCATED AT OR NEAR THE BASE OF THE B-PILLARS AND C-PILLARS.

TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT AT
LEAST ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF EQUIPPED).

Vehicles with side air curtains

Air Bag Disarming and Arming|Page 9244 > < Air Bag Disarming and Arming|Page 9242