Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
6. Install the stabilizer bar link and tighten the nut.
All vehicles
7. Connect the lines to the gear and tighten the nut.
8. CAUTION: Do not allow the intermediate shaft to rotate while it is disconnected from the gear or damage to the clockspring can occur. If there is
evidence that the intermediate shaft has rotated, the clockspring must be removed and recentered.
Connect the intermediate shaft to the gear and tighten the bolt.
4.6L vehicles
9. Install the shield and the bolts.
