Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
6. CAUTION: Do not bend or damage the bracket.
Using a suitable tool, squeeze the two shift cable retainer lock tabs above the bracket, and disconnect the retainer from the bracket.
7. Push the rubber grommet through the bulkhead.
8. Raise and support the vehicle.
9. Remove the shift cable from the vehicle.
1
Disconnect the shift cable from the manual control lever.
2
Disconnect the shift cable from the shift cable bracket.
3
Remove the shift cable from the vehicle.
10. Remove the bolts and the shift cable bracket.
11. Lower the vehicle.
Installation
