Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Wheel Hub: Service and Repair
Front
Wheel Hub
Removal and Installation
1. NOTE: The wheel speed sensor connectors are located in the engine compartment and are secured to the fender aprons.
Disconnect the wheel speed sensor connector.
2. Remove the brake disc.
3. Detach the harness from the retainers.
4. Remove the bolts, wheel hub and sensor as an assembly.
^
Discard the bolts.
5. NOTE: Apply a thin coat of silicone sealant to the wheel hub mounting surfaces before installation.
To install, reverse the removal procedure.