Explorer 2WD V8-302 5.0L VIN P SFI (1999)
2
Locate the rib on the steering column lock cylinder housing, and gently release the anti-theft transceiver over the rib.
NOTE: Only apply pressure or leverage below the key cylinder lower rib.
3
Disconnect the electrical connector.
NOTE: The steering wheel is shown removed for clarity.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
^
No key replacement or re-initialization needs to occur with the removal or installation of a new PATS Transceiver.
^
The steering wheel is shown removed for clarity.
